Gewusst wie zum Messen ct Polarität mit Multimeter
Gewusst wie zum Messen ct Polarität mit Multimeter
Strom Transformator, CT: Elektromagnetisch Strom Transformator ist weitverbreitet verwendet in Leistung System, und sein Funktionieren Prinzip ist ähnlich zu das von Transformator.
Die Eigenschaften von Strom Transformator sind als folgt: (1) Die Primär Spule ist verbunden in Reihe in der Schaltung mit wenigen Windungen, so der Strom in der Primär Spule hängt ganz von der Last Strom von der Schaltung zu sein geprüft, aber hat nichts zu tun mit dem sekundären Strom; (2) Die Impedanz von dem Strom Spule von dem Instrument und Relais verbunden mit der Sekundärspule von dem Strom Transformator ist sehr klein, so unter normal umstände, der strom transformator läuft in eine nah kurzschluss zustand.
The Ratio von Primär und Sekundär Nenn Strom von Strom Transformator ist der Nenn Nenn gegenseitige Induktivität Verhältnis von Strom Transformator: kn=I1n/I2n.
Weil der bewertete Strom I1n von der primären Spule war genormt und der bewertete Strom I2n von der sekundären Spule ist vereinheitlicht zu 5(1 oder {0.5) A, der bewerteten gegenseitigen Induktivität Verhältnis von dem Strom Transformator hat auch war standardisiert. Kn kann auch sein ungefähr ausgedrückt als die Windungen Verhältnis von dem Primär und sekundären Wicklungen von dem Transformator, dass ist, wobei kn≈kN{% 7b6}}N1/N2 ist die Anzahl der Windungen der Primär und Sekundär Wicklungen.
Die Funktion von Strom Transformator ist zu messen relativ groß Strom.
Allgemein sprechen, wenn du willst messen der Strom von 400A, was solltest du ohne eine 400A Wattstunde Meter? Deshalb, du solltest verwenden einen Strom Transformator zu Änderung einen großen Strom in einen kleinen Strom und einen einen einen kleinen Strom und einzugeben es in die Wattstunde Meter. Der Transformator hat eine Variable Ratio, für Beispiel, 200/5 ist 40 mal das von der Wattstunde Meter, was bedeutet das Ihre Wattstunde Meter hat gewesen aufgeladen einmal. In fact, du hast benutzt 40 Grad von Elektrizität, und es gibt viele Ebenen von Transformatoren, mit 15/5.
For the field, the best way to determine the polarity of the transformer is to use a dry battery and a piece of pointer multimeter MF47. With wires, it is the most direct and easy to see, and the accuracy can reach more than 90 percent . The method is very simple. The standard secondary transformer with P1 P2 on the primary side is S1S2 K1K2, etc. Connect the positive electrode on the secondary side of P1 to the negative electrode of S1, and the secondary side is directly connected. Then directly short-circuit the DC current to the primary side of the transformer with the battery. At this time, you will see that if the pointer swing of the multimeter is extremely positive clockwise, it is negative counterclockwise, indicating that the internal winding is wrong. At this time, you should observe it in detail. Because the pointer swing is not large, it is advisable to use two 1# batteries in the same way, because it is too dangerous to have too many batteries, and stop for half an hour or replace the batteries after about 10 tests. Because the battery was very hot during the test, it is suggested that you should not be lazy to use the 126V converted from alternating current because you saved the battery, but the error increased and the safety decreased.
